This section is for XP driver installations.  XP can be tricky as each machine can have differences.  We try to offer several solutions to assist windows XP users.

From time to time we post upgrades to the FRAGnStein firmware.  You will first need to install this driver on your PC to use the firmware upgrade or the configuration tool.  This in turn allows you to customize your controller. 

Conditions Of Use:

Our software upgrades are free.  They are specially designed for FRAGnStein and are not for any other product.  You may download the software to your computer and you can pass the file around however you may not charge a fee for this file.  By downloading and using this file you agree to be bound to the terms and conditions of use.  Please read through the entire Terms of Use that is posted on our site for full details. 

There are three software programs available to you.  The first is the IBM PC driver.   The second is the Firmware upgrade. Third is the configuration tool. This Driver is required for all other software however the Firmware upgrade is optional.

For driver installation help, please see the video assitance page.

FRAGnStein Modes:

To enter set up mode with the FRAGnStein - press the dongle button while putting the dongle into the USB port.  Release the button as soon as the dongle is in the port. When the FRAGnStein is in setup mode the mouse functions are turned off and you may need a second mouse to manouver through the software.

First:
Uninstall any previous FRAGnStein drivers.

Windows XP Driver Installation:
Hold the dongle button while putting the dongle into the USB port.  Continue to hold the button after it's plugged in for 3 (three) seconds.  The dongle light should be solid blue.

Note: If windows hardware wizard comes up - allow windows to install what it thinks are the drivers.  The hardware wizard can show up three times.  Select to allow windows to install the drivers each time.

Download The Driver:
Press here to Download the XP/Vista32/Windows7 32 bit Driver

After the driver is downloaded select Run.

Note: If windows asks, allow the installation to install.

You may have to bind the driver in the device manager. To do this press the Start button on the lower left corner of your computer screen. 


Select Control Panel.



Go towards the bottom of the icons and select System.


Select Hardware then Device Manager.

Press Continue if asked.


Double click on the Highlite Human Interface Devices, this will open the HID devices installed.


Take out the FRAGnStein dongle.

Now put your dongle into Setup Mode by pressing and holding the dongle button while putting the dongle into the USB port.  Release the button  as soon as the dongle is in the port. You should see a new HID device being added to the Human Interface Devices list.  That new item is the FRAGnStein driver that should say Wireless Mouse Combo.


If you don't see the wireless mouse combo then right click on that HID device and select to update driver.



Select 'no windows update'.
Press Next.
Choose 'pick from a list of device drivers'
Select 'Next'.
Choose 'no search, I'll pick my driver'.
Now you should see the 'Wireless Mouse Combo'.
Choose that and then Next.
Choose Finish

Your now ready to use the firmware upgrade and configuration software.

If you have trouble with this - please see our support videos in the FRAGnStein menu.  If you have trouble with any of this, please send support@bannco.com and email and we will be glad to help you out.